Bharat Heavy Electricals Limited (BHEL)
Last Date:
 18 November 2026


BHEL Artisan Recruitment 2026: Quick Overview

OrganizationBharat Heavy Electricals Limited (BHEL)
Advertisement No.Advt. 01/2026
Post NameArtisan Grade IV (Fitter, Welder, Turner, Machinist, Electrician, Electronics Mechanic, Foundryman)
Total Vacancies660 (tentative)
Job TypeCentral PSU job, regular after one year as Temporary Artisan
Application ModeOnline only
Application Start Date21 October 2026, 10:00 AM
Last Date to Apply18 November 2026, 11:45 PM
Minimum QualificationClass 10 plus ITI (NTC) plus NAC in the same trade, with 60% marks for General and OBC and 55% for SC and ST in both
Age Limit27 years for General and EWS as on 1 October 2026, with relaxations
Selection ProcessComputer Based Exam, then Document Verification and Skill Test
Salary / Pay ScaleRs 24,000 per month in the first year, then Rs 29,500 to Rs 65,000 pay scale
Job LocationRanipet, Visakhapatnam, Bengaluru (two units), Haridwar, Hyderabad, Bhopal, Jhansi and Tiruchirappalli
Official Website careers.bhel.in
Topic/Subject-wise Practice Quizzes For All Types of Examsapnaupdates.com/apna-quiz


BHEL Artisan Recruitment 2026: Quick Intro

Bharat Heavy Electricals Limited (BHEL) has announced 660 Artisan Grade IV vacancies under Advertisement No. 01/2026 across nine manufacturing units and seven trades. The online application process begins on 21 October 2026 and closes on 18 November 2026 at 11:45 PM. The computer-based examination is tentatively scheduled for 11 December 2026.

Artisan Grade IV is an entry-level shop-floor position at Bharat Heavy Electricals Limited (BHEL). Employees in this cadre perform hands-on technical work such as fitting, welding, turning, machining and electrical wiring for equipment including boilers, transformers, turbines and electronic systems. The advertised vacancies are spread across nine manufacturing units, so the roles primarily involve production and technical work rather than office-based duties.

The current recruitment drive is larger than the previous round. BHEL's Advertisement No. 04/2025, issued in July 2025, announced 515 Artisan vacancies. The 2026 notification increases the total to 660 posts, adding 145 vacancies, or approximately 28%. The Fitter trade has also seen a significant increase, from 176 posts in 2025 to 278 posts in 2026.

The previous recruitment process faced a disruption when the computer-based examination held on 8 October 2025 was cancelled due to technical reasons. The examination was subsequently conducted on 12 January 2026. For the current recruitment, the computer-based examination is tentatively scheduled for 11 December 2026. Candidates should keep their plans flexible and follow BHEL's official website for any changes to the examination schedule.


BHEL Artisan Vacancy 2026: Trade-Wise and Category-Wise Posts

BHEL has announced 660 tentative Artisan Grade IV vacancies across nine manufacturing units and seven trades. The final number of vacancies may change based on the company's actual workforce requirements after further assessment. The unit-wise vacancy distribution is provided below: 


The unit codes stand for these plants:

  • BAP: Boiler Auxiliaries Plant, Ranipet, Tamil Nadu
  • HPVP: Heavy Plates and Vessels Plant, Visakhapatnam, Andhra Pradesh
  • EDN: Electronics Division, Bengaluru, Karnataka
  • SBD: Solar Business Division, Bengaluru, Karnataka
  • HEEP: Heavy Electrical Equipment Plant, Haridwar, Uttarakhand
  • HPEP: Heavy Power Equipment Plant, Hyderabad, Telangana
  • HEP: Heavy Electrical Plant, Bhopal, Madhya Pradesh
  • TP: Transformer Plant, Jhansi, Uttar Pradesh
  • HPBP: High Pressure Boiler Plant, Tiruchirappalli

A portion of the advertised vacancies is reserved for dependents of deceased BHEL employees under the compassionate appointment scheme. The exact number of posts allocated for this purpose has not been specified. If these vacancies remain unfilled due to a lack of eligible candidates, they may be transferred to the open recruitment process. As a result, the number of vacancies initially available through open selection may be slightly lower than the advertised total of 660.

The category-wise distribution of vacancies is provided below: 


Application Fee

The application fee for BHEL Artisan Grade IV Recruitment 2026 varies by candidate category. The category-wise fee details are provided below:

The application fee is non-refundable, even if your application is rejected during scrutiny. Payment must be made online through internet banking, debit card or credit card. Applicable bank charges may be extra.
Your application will be considered submitted only after successful payment. Before closing the page, verify the transaction status and ensure that the payment has been completed successfully.


Age Limit

The upper age limit is 27 years for General and EWS candidates, calculated as of 1 October 2026. Eligible candidates from reserved categories and other specified groups may receive age relaxation as per the recruitment rules.
The applicable age relaxations are listed below: 

Category

Relaxation

Upper Age Limit

General / EWSNone27 years
OBC (NCL)3 years30 years
SC / ST5 years32 years
PwD (General)10 years37 years
PwD (OBC NCL)13 years40 years
PwD (SC / ST)15 years42 years
Domiciled in Jammu and Kashmir, 1 January 1980 to 31 December 19895 yearsApplicable limit plus 5 years
Ex-servicemenAs per government rulesAs per government rules

Note: Candidates with relevant work experience may be eligible for age relaxation of up to 7 years, subject to the prescribed conditions. To qualify, candidates must have at least 6 months of relevant work experience and submit the experience certificate in the prescribed format available in the Important Links section below. 


Educational Qualification

Candidates must meet all three educational and technical qualification requirements in the same trade:
1. Class 10: Must have passed the 10th standard.
2. National Trade Certificate (NTC): Must hold an NTC issued by an ITI in the relevant trade.
3. National Apprenticeship Certificate (NAC): Must hold an NAC in the same trade.
Candidates must also meet the following minimum marks criteria separately in both the ITI qualification and the NAC:
> General and OBC candidates: At least 60% marks.
> SC and ST candidates: At least 55% marks.

*Meeting the required percentage in one qualification doesn't compensate for falling short in the other. Candidates must satisfy the minimum marks requirement in both the NTC/ITI and NAC qualifications.

All required certificates and marksheets must have been issued on or before 1 October 2026. Only qualifications obtained through full-time, regular courses will be considered. An NAC issued after 1 October 2026 will not be accepted for this recruitment. The NAC must be issued by the competent authority as specified in the recruitment notification.

Ex-servicemen claiming trade equivalence based on training from an Army, Air Force or Naval institute must submit the prescribed equivalence certificate as proof of their qualification. For eligible ex-servicemen claiming trade equivalence, the minimum marks requirement does not apply, subject to the conditions specified in the recruitment notification.

Reserved-category candidates should check the vacancy distribution for their preferred manufacturing unit before applying. If a unit has no vacancies reserved for a candidate's category, the candidate may have to meet the General category eligibility standard, without the applicable relaxation in minimum qualifying marks. For example, if HEEP and TP have no vacancies reserved for ST candidates, an ST candidate with 56% marks may not meet the 60% minimum required under the General category standard for those units.

Knowledge of the regional language is desirable but not mandatory for candidates applying to BHEL units located in Tamil Nadu, Telangana, Andhra Pradesh and Karnataka. For the remaining units, knowledge of Hindi is desirable. These language skills are preferred but are not compulsory eligibility requirements.


Selection Process

The selection process consists of two stages. Candidates must qualify at each stage to be considered for the final merit list.
Stage I: Computer-Based Examination (CBE) => Candidates must appear for a computer-based examination in their respective trade. The examination carries 100 marks, which count towards the merit list.
Stage II: Document Verification and Skill Test => Candidates shortlisted after the computer-based examination must undergo document verification, followed by a qualifying skill test. The skill test is mandatory, but its marks are not added to the final merit score.

Candidates must secure the prescribed minimum marks in the Computer-Based Examination (CBE) to qualify for the next stage of selection.
> General (UR) and EWS: 40%
> OBC (NCL), SC and ST: 30%

Eligible Persons with Disabilities (PwD) and Ex-Servicemen may receive relaxed qualifying marks for shortlisting to the Skill Test:
> UR and EWS: 30%
> OBC (NCL), SC and ST: 22.5%
Important: The relaxed qualifying marks apply only for shortlisting candidates for the Skill Test.

Candidates are shortlisted for the Skill Test based on their CBE marks, following a 1:3 ratio against the number of vacancies. Shortlisting is carried out separately for each trade, category and manufacturing unit. If a particular category has only one vacancy in a trade and unit, up to five candidates may be shortlisted for the Skill Test. The shortlisting process follows these rules:

1. Common merit ranking: All Unreserved (UR) candidates and reserved-category candidates who have not availed any relaxation are initially ranked together based on their CBE marks.
2. Reserved vacancies: The remaining reserved-category vacancies are filled from eligible candidates of the respective categories who are not included in the initial common merit list, as per the prescribed selection rules.


After this, candidates must pass Document Verification and qualify in the Skill Test. The final merit list is then prepared on CBE score alone.

The Computer-Based Examination (CBE) will be conducted in Hindi, English or one of the following regional languages: Kannada, Telugu and Tamil. Candidates can select up to five preferred examination centres while filling out the application form. BHEL reserves the right to add or cancel examination cities depending on the number of candidates opting for each centre.

Note: For complete details about the examination structure, subjects and marking scheme, refer to the Official CBE Exam Pattern PDF available in the Important Links section below.


Salary, Job Location and Service Conditions

Selected candidates will initially be appointed as Temporary Artisans for one year, with consolidated wages of β‚Ή24,000 per month. After completing the one-year period, candidates will be regularised as Artisan Grade IV at the minimum of the pay scale of β‚Ή29,500 to β‚Ή65,000, along with applicable allowances as per the rules in force at that time. 

Candidates recognised as Best Apprentice or Runner-Up Apprentice in the All India Apprentice Skill Competitions conducted by the Directorate General of Employment and Training (DGET) are eligible for preference under the prescribed rules. Such candidates must apply online and upload their Certificate of Merit. They must also appear for both the Computer-Based Examination (CBE) and the Skill Test as part of the selection process.
If selected, the pay benefits are as follows:
> Best Apprentice: Appointment with two additional increments.
> Runner-Up Apprentice: Appointment at the minimum of the prescribed pay scale.

The job location for BHEL Artisan Grade IV Recruitment 2026 will be the manufacturing unit selected by the candidate during the application process from the nine available units. There is no common pan-India posting pool for these vacancies. Selected candidates must serve at their allocated unit for a minimum of 20 years from the date of joining. As per the stated recruitment conditions, transfer requests will not be entertained during this 20-year period.
Note:Transfer requests due to unavoidable personal circumstances may be considered only if a suitable vacant position is available. Any such transfer is subject to the prescribed conditions and may require the employee to revert to the original post on which they were absorbed.

The Artisan Grade IV role involves hands-on production work on the shop floor rather than office-based duties. Candidates should be prepared for factory operations and shift duties, as required by the allocated manufacturing unit.
Before joining, selected candidates must undergo a medical examination conducted by the Company's Authorised Officer. Candidates must meet the prescribed medical standards, and no relaxation in health requirements is permitted.
There is no separate service bond specified. However, the requirement to serve at the allocated unit for a minimum of 20 years from the date of joining represents a significant long-term commitment.

Note: For complete details about medical fitness standards and examination requirements, refer to the Official Medical Examination Rules available in the Important Links section below. 


How to Apply for BHEL Artisan Recruitment 2026

  1. Go to the official website https://careers.bhel.in after 10:00 AM on 21 October 2026.
  2. Open the Artisan Grade IV recruitment link and read the instructions given on the portal.
  3. Decide your unit and trade before starting, because only one unit and one trade can be selected.
  4. Register with a valid email ID and active mobile number. Keep that email active for at least one year.
  5. Fill in your name exactly as it appears in your SSC or Matriculation certificate.
  6. Fill in the remaining personal and educational details, and choose your category with care, since it cannot be changed later.
  7. Upload the required documents, Photo and signature in the format and size asked on the portal.  
  8. Select up to 5 exam centre choices.
  9. Pay the fee online and confirm that the transaction is successful.
  10. Review the full form, submit it, and download a copy for later use.

If you submit more than one application, only the last submitted one is treated as final.


Required Documents and Important Instructions

Candidates should keep the following documents ready for application and document verification, along with a valid identity proof. Ensure that the details in all certificates match the information entered in the application form.
1. SSC/Matriculation Certificate: Required for verification of the candidate's name and other personal details.
2. ITI (NTC) and NAC Certificates or Marksheets: Must be issued on or before 1 October 2026.
3. OBC (NCL) Certificate: Must be issued on or after 1 January 2026, in the prescribed Central Government format. An additional self-undertaking must be submitted during document verification.
4. EWS Income and Asset Certificate: Must be valid for Financial Year 2026-27, based on income and assets for 2025-26.
5. Disability Certificate: Required for candidates with at least 40% disability, in the format prescribed by the Ministry of Social Justice and Empowerment under G.S.R. 591(E), dated 15 June 2017.
6. Equivalence Certificate and Undertaking: Required for Ex-Servicemen claiming trade equivalence, along with an undertaking confirming that they do not hold a civil appointment.
7. Experience Certificate: Required in the prescribed format for candidates claiming age relaxation based on relevant work experience.
8. Certificate of Merit: Required for candidates claiming preference as Best Apprentice or Runner-Up Apprentice.
9. No Objection Certificate (NOC) or Permission Through Proper Channel: Required for candidates already employed in Central or State Government departments, autonomous bodies or Public Sector Undertakings (PSUs).
Important: Check the official recruitment notification for the prescribed formats and any additional document requirements. Keep clear copies of all applicable certificates ready for verification.

Candidates applying under the Persons with Disabilities (PwD) category should check whether their disability is identified as suitable for the advertised posts. The specified disabilities include:
1. Locomotor disability, with BL (both legs) accepted only for the Electrician and Fitter trades.
2. Leprosy cured.
3. Dwarfism.
4. Acid attack victims.
5. Low vision.
6. Deaf and hard of hearing.
7. Speech and language disability.
8. Multiple disabilities.
*Blindness is not identified as suitable for these posts under the stated criteria.
Eligible candidates with benchmark disabilities may use a scribe, subject to the prescribed conditions. Candidates must carry the original medical certificate and physical limitation certificate to the examination centre, as applicable.

Candidates must carefully follow the recruitment rules to avoid rejection or cancellation of their candidature.
1. No changes after submission: Details entered in the online application are final. Requests to change the mailing address, email address, category or post will not be accepted.
2. OBC Non-Creamy Layer (NCL): OBC candidates who do not qualify under the Non-Creamy Layer category must apply under the General (UR) category.
3. Existing temporary employees: BHEL temporary employees who have not been regularised, as well as those currently on probation, are not eligible to apply.
4. False or concealed information: Providing incorrect information or hiding relevant facts may lead to rejection at any stage of recruitment. After appointment, such violations may result in termination of service and prosecution.
5. Provisional candidature: Receiving a roll number or call letter does not confirm final eligibility. Admission to each stage remains provisional until the prescribed eligibility conditions are verified.
6. BHEL's authority over recruitment: BHEL reserves the right to cancel, restrict, expand or reopen the recruitment process without prior notice.
Important: Verify your eligibility and ensure that all details and supporting documents are accurate before submitting the application form.

Candidates should use only the official BHEL recruitment website, careers.bhel.in, for application-related information and recruitment updates. BHEL will communicate important messages to candidates through email, and no correspondence will be sent by post. Therefore, candidates should provide a valid email address and check their inbox regularly.
Any legal dispute arising from the recruitment process will be subject to the jurisdiction of the courts located in the city where the concerned manufacturing unit is situated.


Related Posts:


❓Frequently Asked Questions (FAQs)

How many vacancies are there in BHEL Artisan Recruitment 2026?

There are 660 tentative vacancies for Artisan Grade IV across nine BHEL units.

What is the last date to apply?

Applications close on 18 November 2026 at 11:45 PM, and the form opens on 21 October 2026 at 10:00 AM. 

Who is eligible to apply for BHEL Artisan 2026?

Anyone with ITI and NAC in one of the seven trades, who is within the age limit, can apply. People already engaged as temporary BHEL employees and not yet regularised or on probation cannot. Those in government or PSU jobs must apply through proper channel or bring a No Objection Certificate.

What is the age limit including relaxations?

The upper limit is 27 years for General and EWS as on 1 October 2026. OBC (NCL) get 3 years, SC and ST get 5 years, and PwD candidates get 10, 13 or 15 years by category. Up to 7 years is allowed for work experience, with a total ceiling of 56 years.

What qualification is required?

Class 10, an ITI National Trade Certificate and a National Apprenticeship Certificate in the same trade, from full time regular courses, issued on or before 1 October 2026. Marks must be at least 60 per cent for General and OBC and 55 per cent for SC and ST in both certificates.

What is the selection process?

Selection has two stages. First comes a Computer Based Exam, then Document Verification and a qualifying Skill Test for candidates shortlisted in a 1:3 ratio. The final merit list uses only the CBE score.

What is the salary for BHEL Artisan Grade IV?

For the first year, Temporary Artisans get consolidated wages of Rs 24,000 per month. After regularisation, they are placed at the minimum of the Rs 29,500 to Rs 65,000 pay scale with allowances in force at that time. 

What is the application fee?

General, EWS and OBC candidates pay Rs 1,072, made up of a Rs 600 examination fee and a Rs 400 processing fee plus GST. SC, ST, PwD and Ex-servicemen pay Rs 472, which is the processing fee with GST. The fee is non-refundable, and bank charges may be extra.

How can I apply online?

Visit careers.bhel.in from 21 October 2026, register with your email and mobile number, and fill the form for one unit and one trade. Upload documents, choose up to five exam centres, pay the fee online and submit. Download a copy of the final form before leaving the portal.

What is the official website for this recruitment?

The official website is careers.bhel.in. Applications, call letters, date changes and FAQs are all hosted there, and BHEL says no other mode of application is accepted. Because BHEL sends messages by email and not by post, keep your registered email active for a year.

Can I apply for more than one unit or trade?

No. You can apply for one manufacturing unit and one trade only, because the exam for all vacancies is held on the same day. If you submit twice, only the last application counts. Decide your unit and trade before opening the form, since details cannot be changed later.

Can I get a transfer after joining?

Not as a routine matter. Selected artisans must stay at their allocated unit for at least 20 years, and transfer requests are not entertained in that time. An exception for unavoidable personal reasons is possible only if a suitable position exists, and it means going back to your original post.


Conclusion

We at ApnaUpdates.com hope the information provided above helps you understand the BHEL Artisan Grade IV Recruitment 2026. Our aim is to provide accurate, relevant and detailed recruitment information in a simple format, so you can find all the important details in one place and apply with confidence.
The online application process opens on 21 October 2026. Before applying, carefully decide your preferred manufacturing unit and trade, as requests to change your selected post after submission will not be accepted. Keep your ITI (NTC) and NAC certificates or marksheets ready, and verify that you meet the minimum marks requirement for your category in both qualifications separately. Also, check your age, eligibility and supporting documents before submitting the form to avoid application-related issues.

After the application window closes, visit the official BHEL recruitment website, careers.bhel.in, regularly for updates on the examination date, admit cards or call letters, and Skill Test notices. The computer-based examination is tentatively scheduled for 11 December 2026, so check the website every few days for any changes to the schedule.
BHEL will also send important recruitment-related communications to your registered email address. Keep your email account active and check your inbox regularly to avoid missing important notifications.


 

Disclaimer: This article is based on the official notification and simplified for easy understanding. For the most accurate and updated information, always refer to the official website.


 
Tags:
BHEL Recruitment 2026, BHEL Artisan, ITI Jobs, PSU Jobs, Artisan Grade IV, Fitter Vacancy, Welder Vacancy, Government Jobs 2026